BLING SPANGLE TRANSFERS ✨

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Spangle is 9.5 x 8.3 inches 

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is 9.5 x 8.3inches 

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Spangle is 9.5 x 8.3 inches 

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is 9.5 x 8.3inches 

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

10x 6.1 inches

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

10x 6.1 inches

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

10x 6.1 inches

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

10x 6.1 inches

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM 

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is between 10.6 inches wide

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is 11 X 7 

if you need a smaller size for a youth please include length in notes section

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is between 10.75-11 inches wide and between 3.5-4 inches tall depending on word

if you need a smaller size for a youth please include length in notes section

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM 

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is between 10.6 inches wide

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM 

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is about 11 inches wide

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds

approximately 11 inches wide

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heat press is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

approximately 11 inches wide

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

approximately 11 inches wide

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heat press is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

approximately 11 inches wide

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

approximately 11 inches wide

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heat press is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

approximately 11 inches wide

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

approximately 11 inches wide

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heat press is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

approximately 11 inches wide

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

approximately 11 inches wide

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heat press is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

approximately 11 inches wide

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

approximately 10.75 inches wide

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heat press is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

approximately10.75 inches wide

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds