Elevate your wardrobe with our unisex embroidered shirt, showcasing a 3D foam embroidered cross on the left chest. This striking design offers a unique raised texture, adding depth and a modern touch to a classic piece. Available in a variety of colors, this versatile shirt combines comfort and style, making it perfect for any occasion. Choose your favorite color and make a bold statement with this distinctive and elegant addition to your collection.

Tshirt Fabric Details :

Comfort Colors Adult Short Sleeve Tee. 100% 6 ounce ring spun combed cotton fabric with color garment dyed process. Two needle rib collar, hem sleeves and bottom. Twill shoulder tape, twill label. Classic fit.

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

Print Around 8 - 8.5 Inches

PRE PRESS GARMENT for 10 seconds

300 Degrees for 5 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

PRE PRESS GARMENT FOR 10 SECONDS

Press at 300 Degrees for 3 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

Press again for 3-5 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw

Pressing Instructions: 

1. Prepress garment for 5 seconds

2. Press garment with transfer at 325-350 degrees for 15 seconds with high pressure, use a teflon sheet

3. Turn garment inside out and press for an additional 10 seconds

Dimensions:

10 inches tall by 10.75 inches wide

Machine wash cold, NO FABRIC SOFTNER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

PRE PRESS GARMENT FOR 10 SECONDS

Press at 300 Degrees for 3 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

Press again for 3-5 seconds

Spangle is 9.5 inches wide

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is 9.5 inches wide

if you need a smaller size for a youth please include length in notes section

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

Spangle is silver and 10 inches

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is 9.5 inches wide

if you need a smaller size for a youth please include length in notes section

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

PRE PRESS GARMENT FOR 10 SECONDS

Press at 300 Degrees for 3 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

Press again for 3-5 seconds

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

PRE PRESS GARMENT FOR 10 SECONDS

Press at 300 Degrees for 3 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

Press again for 3-5 seconds

Spangle is silver and 11 inches

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is 9.5 inches wide

if you need a smaller size for a youth please include length in notes section

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

Get spooky and sparkly this season with our blinged-out Jack O’ Lantern Skull sweatshirt! This design features a dazzling spangle transfer that combines the iconic pumpkin with a spooky skull face — perfect for Halloween lovers who like their creepy with a side of cute ✨🎃

Made on a super soft unisex sweatshirt, it’s comfy enough for a night of trick-or-treating, pumpkin patch photos, or lounging with your favorite Halloween movies.

Product Details:

• Eye-catching bling spangle design (not vinyl!)

• Soft unisex sweatshirt – relaxed fit

• High-shine sparkle that lasts wash after wash

• Available in multiple sizes

• Designed and pressed by hand in our small business

This spooky season, stand out and sparkle!

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

Print Around 8 - 8.5 Inches

PRE PRESS GARMENT for 10 seconds

300 Degrees for 5 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

Print Around 8 - 8.5 Inches

PRE PRESS GARMENT for 10 seconds

300 Degrees for 5 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

PRE PRESS GARMENT FOR 10 SECONDS

Press at 300 Degrees for 3 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

Press again for 3-5 seconds

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

PRE PRESS GARMENT FOR 10 SECONDS

Press at 300 Degrees for 3 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

Press again for 3-5 seconds