Embroidered MAMA tie-dye crewneck sweatshirt. 

Sweatshirts are midweight and very soft! 

Sweatshirts are a UNISEX fit.

9 oz. 80/20 ringspun cotton/polyester blend

Care Instructions: 

- Machine wash cold
- Tumble dry low
- No bleach

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw

Pressing Instructions: 

1. Prepress garment for 5 seconds

2. Press garment with transfer at 325-350 degrees for 15 seconds with high pressure, use a teflon sheet

3. Turn garment inside out and press for an additional 10 seconds

Dimensions:

3 inches tall by 11  inches wide

Machine wash cold, NO FABRIC SOFTNER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is between 10.75-11 inches wide and between 3.5-4 inches tall depending on word

if you need a smaller size for a youth please include length in notes section

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

approximately 11 inches wide

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heat press is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

approximately 11 inches wide

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is between 10.75-11 inches wide and between 3.5-4 inches tall depending on word

if you need a smaller size for a youth please include length in notes section

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is 11 X 8 

if you need a smaller size for a youth please include length in notes section

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

Print Around 8 - 8.5 Inches

PRE PRESS GARMENT for 10 seconds

300 Degrees for 5 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

Print Around 8 - 8.5 Inches

PRE PRESS GARMENT for 10 seconds

300 Degrees for 5 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is between 10.75-11 inches wide and between 3.5-4 inches tall depending on word

if you need a smaller size for a youth please include length in notes section

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

PRE PRESS GARMENT FOR 10 SECONDS

Press at 300 Degrees for 3 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

Press again for 3-5 seconds

Embroidered "Professional Procrastinator"  t-shirt 

Design is approximately 7in x 2in... design size is the same across all sizes

T-shirts are heavyweight garment dyed

T-shirts are a UNISEX, Relaxed fit.

8.3 oz. 100% ringspun cotton

Care Instructions: 

- Machine wash cold
- Tumble dry low
- No bleach

Embroidered "Professional Overthinker"  t-shirt 

Design is approximately 8in x 2in... design size is the same across all sizes

T-shirts are heavyweight garment dyed

T-shirts are a UNISEX, Relaxed fit.

8.3 oz. 100% ringspun cotton

Care Instructions: 

- Machine wash cold
- Tumble dry low
- No bleach

Embroidered "Professional Procrastinator"  t-shirt 

Design is approximately 8in x 2in... design size is the same across all sizes

T-shirts are heavyweight garment dyed

T-shirts are a UNISEX, Relaxed fit.

8.3 oz. 100% ringspun cotton

Care Instructions: 

- Machine wash cold
- Tumble dry low
- No bleach

Celebrate Dad’s unique sense of humor with our hilarious Father’s Day shirt! Perfect for the dad who loves to laugh, this tee is sure to become his new favorite. Crafted from soft, comfortable fabric, it’s ideal for a day of dad jokes, BBQs, and all the fun that Father’s Day brings. Show your appreciation with a gift that’s as funny and awesome as he is!

The design is printed directly onto the T-shirt using a direct to garment printer! No need to worry about the design peeling. Wash as you normally would, these are printed to last!

Shirts are a unisex fit!

Tshirt Fabric Details :Comfort Colors Adult Short Sleeve Tee. 100% 6 ounce ring spun combed cotton fabric with color garment dyed process. Two needle rib collar, hem sleeves and bottom. Twill shoulder tape, twill label. Classic fit.  

Care Instructions: 

- Machine wash cold
- Tumble dry low
- No bleach