Sort by:
1765 products
1765 products
Embroidered Cute Spooky Ghost Tee!
Shirts are a unisex fit!
Tshirt Fabric Details :
Comfort Colors Adult Short Sleeve Tee. 100% 6 ounce ring spun combed cotton fabric with color garment dyed process. Two needle rib collar, hem sleeves and bottom. Twill shoulder tape, twill label. Classic fit.
**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**
Print Around 8 - 8.5 Inches
PRE PRESS GARMENT for 10 seconds
300 Degrees for 5 Seconds
HIGH PRESSURE 60psi/8-9 pressure
Peel Immediately
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Press garment with transfer at 325-350 degrees for 15 seconds with high pressure, use a teflon sheet
3. Turn garment inside out and press for an additional 10 seconds
Dimensions:
8 inches tall by 11 inches wide
Machine wash cold, NO FABRIC SOFTNER, hang to dry
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Remove White Backing from Transfer
3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET
4. Peel WARM not HOT
5. If you would like to press again you can use parchment paper
Dimensions:
Spangle is between 10.75-11 inches wide and between 3.5-4 inches tall depending on word
if you need a smaller size for a youth please include length in notes section
Machine wash cold, NO FABRIC SOFTENER, hang to dry
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds
**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**
Print Around 8 - 8.5 Inches
PRE PRESS GARMENT for 10 seconds
300 Degrees for 5 Seconds
HIGH PRESSURE 60psi/8-9 pressure
Peel Immediately
Get ready for spooky season with this adorable embroidered Halloween shirt featuring three dancing skeletons surrounded by pumpkins, bats, spider webs, and festive Halloween details. This fun fall design is professionally embroidered for a boutique-quality look that stands out from ordinary printed shirts.
Perfect for pumpkin patch visits, Halloween parties, trick-or-treating, school events, spooky season photos, or simply showing off your love for all things Halloween.
Product Details:
- Professionally embroidered design
- Premium Comfort Colors® garment-dyed t-shirt
- Soft, lived-in feel from the first wear
- Unisex relaxed fit
- High-quality stitching designed to last
- Halloween-inspired orange and white embroidery
Perfect For:
- Halloween lovers
- Pumpkin patch outfits
- Fall festivals
- Spooky season apparel
- Halloween parties
- Matching family Halloween outfits
- Teacher Halloween shirts
Fit:
- Unisex Comfort Colors fit
- Relaxed, slightly oversized style
- Order your normal size for a relaxed fit
- Size up for an extra oversized look
Care Instructions:
- Machine wash cold, inside out
- Tumble dry low
- Do not bleach
- Do not iron directly on embroidery
This embroidered skeleton shirt is the perfect mix of spooky and cute, making it a must-have addition to your fall wardrobe!
Celebrate spooky season in style with this adorable embroidered Halloween sweatshirt! Featuring three dancing skeletons surrounded by pumpkins, bats, spider webs, and festive Halloween details, this cozy sweatshirt is the perfect combination of spooky and cute.
Professionally embroidered for a boutique-quality finish, this design is stitched directly into the sweatshirt for a premium look that will last season after season. Whether you're heading to a pumpkin patch, Halloween party, trick-or-treat event, or simply enjoying all things fall, this sweatshirt is sure to become a favorite.
Product Details:
- Professionally embroidered design
- Soft and cozy crewneck sweatshirt
- Unisex fit
- Premium stitching for long-lasting wear
- Classic black sweatshirt with orange and white embroidery
- Perfect for fall and Halloween
Perfect For:
- Halloween parties
- Pumpkin patch visits
- Fall festivals
- Trick-or-treating
- Spooky season lovers
- Teacher Halloween outfits
- Matching family Halloween photos
Fit:
- Unisex relaxed fit
- True to size
- Size up for an oversized look
Care Instructions:
- Machine wash cold, inside out
- Tumble dry low
- Do not bleach
- Do not iron directly on embroidery
This embroidered skeleton sweatshirt is the perfect cozy layer for chilly fall days and spooky nights. A fun Halloween staple you'll reach for year after year!
**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**
Print Around 8 - 8.5 Inches
PRE PRESS GARMENT for 10 seconds
300 Degrees for 5 Seconds
HIGH PRESSURE 60psi/8-9 pressure
Peel Immediately
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Remove White Backing from Transfer
3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET
4. Peel WARM
5. If you would like to press again you can use parchment paper
Dimensions:
10.9 inches tall by 9.6 inches wide
Machine wash cold, NO FABRIC SOFTNER, hang to dry
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Remove White Backing from Transfer
3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET
4. Peel WARM
5. If you would like to press again you can use parchment paper
Machine wash cold, NO FABRIC SOFTNER, hang to dry
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Spangle is 9.5 x 8.3 inches
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Remove White Backing from Transfer
3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET
4. Peel WARM not HOT
5. If you would like to press again you can use parchment paper
Dimensions:
Spangle is 9.5 x 8.3inches
Machine wash cold, NO FABRIC SOFTENER, hang to dry
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds
approximately 11 inches wide
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heat press is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Remove White Backing from Transfer
3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET
4. Peel WARM not HOT
5. If you would like to press again you can use parchment paper
Dimensions:
approximately 11 inches wide
Machine wash cold, NO FABRIC SOFTENER, hang to dry
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds
Embroidered " do it ANYWAY" crewneck sweatshirt.
Sweatshirts are midweight and very soft!
Sweatshirts are a UNISEX fit.
8.3 oz. 80/20 ringspun cotton/polyester blend
Care Instructions:
- Machine wash cold
- Tumble dry low
- No bleach
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Press garment with transfer at 325-350 degrees for 15 seconds with high pressure, use a teflon sheet
3. Turn garment inside out and press for an additional 10 seconds
Dimensions:
7 inches tall by 10 inches wide
Machine wash cold, NO FABRIC SOFTNER, hang to dry
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Press garment with transfer at 325-350 degrees for 15 seconds with high pressure, use a teflon sheet
3. Turn garment inside out and press for an additional 10 seconds
Dimensions:
8.5 inches tall by 11 inches wide
Machine wash cold, NO FABRIC SOFTNER, hang to dry
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds
Showing 795/1765
