Sort by:
1765 products
1765 products
**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**
Print Around 8 - 8.5 Inches
PRE PRESS GARMENT for 10 seconds
300 Degrees for 5 Seconds
HIGH PRESSURE 60psi/8-9 pressure
Peel Immediately
**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**
Print Around 8 - 8.5 Inches
PRE PRESS GARMENT for 10 seconds
300 Degrees for 5 Seconds
HIGH PRESSURE 60psi/8-9 pressure
Peel Immediately
approximately 11 inches wide
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heat press is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Remove White Backing from Transfer
3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET
4. Peel WARM not HOT
5. If you would like to press again you can use parchment paper
Dimensions:
approximately 11 inches wide
Machine wash cold, NO FABRIC SOFTENER, hang to dry
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Remove White Backing from Transfer
3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET
4. Peel WARM not HOT
5. If you would like to press again you can use parchment paper
Dimensions:
Spangle is between 10.75-11 inches wide and between 3.5-4 inches tall depending on word
if you need a smaller size for a youth please include length in notes section
Machine wash cold, NO FABRIC SOFTENER, hang to dry
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Remove White Backing from Transfer
3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET
4. Peel WARM not HOT
5. If you would like to press again you can use parchment paper
Dimensions:
Spangle is between 10.75-11 inches wide and between 3.5-4 inches tall depending on word
if you need a smaller size for a youth please include length in notes section
Machine wash cold, NO FABRIC SOFTENER, hang to dry
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Press garment with transfer at 325-350 degrees for 15 seconds with high pressure, use a teflon sheet
3. Turn garment inside out and press for an additional 10 seconds
Dimensions:
6.5 inches tall by 10 inches wide
Machine wash cold, NO FABRIC SOFTNER, hang to dry
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Press garment with transfer at 325-350 degrees for 15 seconds with high pressure, use a teflon sheet
3. Turn garment inside out and press for an additional 10 seconds
Dimensions:
11 inches tall by 9.5 inches wide
Machine wash cold, NO FABRIC SOFTNER, hang to dry
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Remove White Backing from Transfer
3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET
4. Peel WARM not HOT
5. If you would like to press again you can use parchment paper
Dimensions:
Spangle is 6 x 6 inches
if you need a smaller size for a youth please include length in notes section
Machine wash cold, NO FABRIC SOFTENER, hang to dry
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Remove White Backing from Transfer
3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET
4. Peel WARM not HOT
5. If you would like to press again you can use parchment paper
Dimensions:
Spangle is 6 x 6 inches
if you need a smaller size for a youth please include length in notes section
Machine wash cold, NO FABRIC SOFTENER, hang to dry
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds
11 x 6 inches
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Remove White Backing from Transfer
3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET
4. Peel WARM
5. If you would like to press again you can use parchment paper
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds
Elevate your game day look with our embroidered 'Baseball Mom' sweatshirt! Show your unwavering support for your favorite player with this cozy and stylish addition to your wardrobe. Crafted with meticulous attention to detail, each letter is expertly embroidered to ensure durability and longevity. Made from premium quality materials, this sweatshirt offers both comfort and style, making it perfect for cheering on your athlete from the stands or while running errands around town. Whether you're a seasoned baseball mom or new to the game, this sweatshirt is sure to become a favorite go-to piece in your closet. Get yours today and rock your proud mom status in style!
Sweatshirts are a unisex fit!
Sweatshirts are 80% cotton 20% polyester
Care Instructions:
- Machine wash cold
- Tumble dry low
- No bleach
11 x 6 inches
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Remove White Backing from Transfer
3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET
4. Peel WARM
5. If you would like to press again you can use parchment paper
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Remove White Backing from Transfer
3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET
4. Peel WARM not HOT
5. If you would like to press again you can use parchment paper
Dimensions:
Spangle is 10 x 8 inches
if you need a smaller size for a youth please include length in notes section
Machine wash cold, NO FABRIC SOFTENER, hang to dry
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds
Spangle is silver and 10.5 inches
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Remove White Backing from Transfer
3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET
4. Peel WARM not HOT
5. If you would like to press again you can use parchment paper
Dimensions:
Spangle is 9.5 inches wide
if you need a smaller size for a youth please include length in notes section
Machine wash cold, NO FABRIC SOFTENER, hang to dry
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds
HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.
Spangle is 10 x 5.7 inches
Pressing Instructions:
1. Prepress garment for 5 seconds
2. Remove White Backing from Transfer
3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET
4. Peel WARM not HOT
5. If you would like to press again you can use parchment paper
Dimensions:
Spangle is 10 x 5.7 inches
Machine wash cold, NO FABRIC SOFTENER, hang to dry
PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds
Showing 525/1765
