**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

PRE PRESS GARMENT FOR 10 SECONDS

Press at 300 Degrees for 3 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

Press again for 3-5 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Spangle is 9.8 x 8.66 inches 

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is 9.8 x 8.66 inches 

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

11.2 x 5.7 inches

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM 

5. If you would like to press again you can use parchment paper

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM 

5. If you would like to press again you can use parchment paper

Dimensions:

4.5 inches tall by 11  inches wide

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 FOR 20 second 

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM 

5. If you would like to press again you can use parchment paper

Dimensions:

11  inches wide

Machine wash cold, NO FABRIC SOFTNER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds

approximately 11 inches wide

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heat press is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

approximately 11 inches wide

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw

Pressing Instructions: 

1. Prepress garment for 5 seconds

2. Press garment with transfer at 325-350 degrees for 15 seconds with high pressure, use a teflon sheet

3. Turn garment inside out and press for an additional 10 seconds

Dimensions:

10 inches tall by 10.75 inches wide

Machine wash cold, NO FABRIC SOFTNER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is between 10.75-11 inches wide and between 3.5-4 inches tall depending on word

if you need a smaller size for a youth please include length in notes section

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

approximately 11 inches wide

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heat press is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

approximately 11 inches wide

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

PRE PRESS GARMENT FOR 10 SECONDS

Press at 300 Degrees for 3 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

Press again for 3-5 seconds

Turn heads and sparkle a little brighter in our “BABE” embroidered & spangle sweatshirt — where cozy meets glam! This gorgeous crewneck features thick varsity-style applique letters outlined with silver iridescent spangles that catch the light with every move. Each sweatshirt is carefully stitched and embellished by hand, giving it that high-end boutique feel you can see and feel in person. 💖

Perfect for:
✔ Valentine’s Day
✔ Galentine’s brunch
✔ Photoshoots & content
✔ Gifts for your favorite babe (including yourself!)

✨ DETAILS

• Premium Gildan Softstyle crewneck — soft, warm & cozy

• Embroidered + spangle embellishment for extra shine

• Hand-placed details for a truly one-of-a-kind finish
  

• Sleeve detail: “too glam to give a damn” (YES, she’s that girl)

💕 SIZING

Unisex fit — comfy, relaxed & true to size.
For an oversized look, size up 1–2 sizes.

✂️ MADE BY HAND

Every order is made by us in-house — meaning each piece is unique and stitched with care. Small variations in placement or sparkle are part of the handmade charm.

🧼 CARE

Turn inside out • cold wash • lay flat or hang to dry
(Keeps your sparkle shining!)

Add a touch of whimsical spookiness to your wardrobe with our Embroidered Doodle Ghost and Bats Sweatshirt/Shirt. Perfect for Halloween or any time you want to embrace your playful side, this top combines comfort and style with a fun, festive design.

Features:

Unique Design: Features a charming doodle ghost and bats embroidery, adding a delightful spooky touch.
Premium Quality: Crafted from high-quality fabric, ensuring a soft, cozy, and durable wear.
Versatile Fit: Available as a sweatshirt or shirt, making it perfect for layering or wearing on its own.
Seasonal Style: Ideal for Halloween parties, pumpkin patch visits, or casual fall outings.
Details:

Material: cotton/poly blend (sweatshirt)
Available Sizes: S, M, L, XL, XXL, 3XL,4XL
Color Options: Classic black, heather gray, or white to complement the embroidery
Care Instructions: Machine wash cold, tumble dry low, do not bleach
Why You'll Love It:
This embroidered top is more than just a piece of clothing; it's a celebration of the spooky season. The playful doodle ghost and bats design is meticulously embroidered, ensuring each piece is unique and high-quality. Whether you're dressing up for a Halloween event or just want to add a touch of fun to your everyday look, this top is a perfect choice.

Get into the spirit of the season with our Embroidered Doodle Ghost and Bats Sweatshirt/Shirt. Order yours today and enjoy the perfect blend of comfort, quality, and festive fun!

 

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw

Pressing Instructions: 

1. Prepress garment for 5 seconds

2. Press garment with transfer at 325-350 degrees for 15 seconds with high pressure, use a teflon sheet

3. Turn garment inside out and press for an additional 10 seconds

Dimensions:

5.75 inches tall by 11.5 inches wide

Machine wash cold, NO FABRIC SOFTNER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw

Pressing Instructions: 

1. Prepress garment for 5 seconds

2. Press garment with transfer at 325-350 degrees for 15 seconds with high pressure, use a teflon sheet

3. Turn garment inside out and press for an additional 10 seconds

Dimensions:

10.5 inches tall by 6.5 inches wide

Machine wash cold, NO FABRIC SOFTNER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds

**THIS IS A SCREEN PRINT TRANSFER NOT A COMPLETED TSHIRT**

Single Color Screen Print Transfer 

PRE PRESS GARMENT 

325 Degrees for 7 Seconds 

HIGH PRESSURE 60psi/8-9 pressure

Peel Hot/Immediately

No Teflon Sheet or Pillows

Can be used on Polyester and Cotton