**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

PRE PRESS GARMENT FOR 10 SECONDS

Press at 300 Degrees for 3 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

Press again for 3-5 seconds

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

PRE PRESS GARMENT FOR 10 SECONDS

Press at 300 Degrees for 3 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

Press again for 3-5 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw

Pressing Instructions: 

1. Prepress garment for 5 seconds

2. Press garment with transfer at 325-350 degrees for 15 seconds with high pressure, use a teflon sheet

3. Turn garment inside out and press for an additional 10 seconds

Dimensions:

4 inches tall by 3.5 inches wide

Machine wash cold, NO FABRIC SOFTNER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw

Pressing Instructions: 

1. Prepress garment for 5 seconds

2. Press garment with transfer at 325-350 degrees for 15 seconds with high pressure, use a teflon sheet

3. Turn garment inside out and press for an additional 10 seconds

Dimensions:

7 inches tall by 11 inches wide

Machine wash cold, NO FABRIC SOFTNER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds

approximately 11 inches wide

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heat press is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

approximately 11 inches wide

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

Embroidered MAMA t-shirt 

T-shirts are heavyweight garment dyed

T-shirts are a UNISEX, Relaxed fit.

8.3 oz. 100% ringspun cotton

Care Instructions: 

- Machine wash cold
- Tumble dry low
- No bleach

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is between 10.75-11 inches wide and between 3.5-4 inches tall depending on word

if you need a smaller size for a youth please include length in notes section

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Recommended Heat Press from HeatpressNation: https://www.heatpressnation.com/?ref=ANGELAPOTTER

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM 

5. If you would like to press again you can use parchment paper

Dimensions:

 11  inches wide

Machine wash cold, NO FABRIC SOFTNER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds

approximately 11 inches wide

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heat press is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

approximately 11 inches wide

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

Sweatshirts are a unisex fit!
Sweatshirts are 80% cotton 20% polyester

Care Instructions: 

- Machine wash cold
- Tumble dry low
- No bleach

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

PRE PRESS GARMENT FOR 10 SECONDS

Press at 300 Degrees for 3 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

Press again for 3-5 seconds

Theres no 1-4 me Embroidered sweatshirt!

Sweatshirts are a unisex fit!

Sweatshirts are 80% cotton 20% polyester

Thank you!

Care Instructions: 

- Machine wash cold
- Hang to dry

- No bleach

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

PRE PRESS GARMENT FOR 10 SECONDS

Press at 300 Degrees for 3 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

Press again for 3-5 seconds

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

Print Around 8 - 8.5 Inches

PRE PRESS GARMENT for 10 seconds

300 Degrees for 5 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately