HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw

Pressing Instructions: 

1. Prepress garment for 5 seconds

2. Press garment with transfer at 325-350 degrees for 15 seconds with high pressure, use a teflon sheet

3. Turn garment inside out and press for an additional 10 seconds

Dimensions:

9.5 inches tall by 10.25  inches wide

Machine wash cold, NO FABRIC SOFTNER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is 6 x 6 inches 

if you need a smaller size for a youth please include length in notes section

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw

Pressing Instructions: 

1. Prepress garment for 5 seconds

2. Press garment with transfer at 325-350 degrees for 15 seconds with high pressure, use a teflon sheet

3. Turn garment inside out and press for an additional 10 seconds

Dimensions:

8 inches tall by 11 inches wide

Machine wash cold, NO FABRIC SOFTNER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Recommended Heat Press from HeatpressNation: https://shrsl.com/4ppzw

Pressing Instructions: 

1. Prepress garment for 5 seconds

2. Press garment with transfer at 325-350 degrees for 15 seconds with high pressure, use a teflon sheet

3. Turn garment inside out and press for an additional 10 seconds

Dimensions:

6.5 inches tall by 10.25 inches wide

Machine wash cold, NO FABRIC SOFTNER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 325-350 FOR 15 seconds

approximately 11 inches wide

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heat press is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

approximately 11 inches wide

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is between 10.75-11 inches wide and between 3.5-4 inches tall depending on word

if you need a smaller size for a youth please include length in notes section

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

PRE PRESS GARMENT FOR 10 SECONDS

Press at 300 Degrees for 3 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

Press again for 3-5 seconds

Spangle is silver and 10 inches

HEAT PRESS REQUIRED, THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER! Please note each heatpress is different so finding the right temperature for your press is important! I recommend getting a heat temperature gun to check your heat press temperature.

Pressing Instructions:

1. Prepress garment for 5 seconds

2. Remove White Backing from Transfer

3. Press garment with transfer at 300 degrees for 20 seconds with high pressure, NO TEFLON SHEET 

4. Peel WARM not HOT

5. If you would like to press again you can use parchment paper

Dimensions:

Spangle is 9.5 inches wide

if you need a smaller size for a youth please include length in notes section

Machine wash cold, NO FABRIC SOFTENER, hang to dry

PLEASE NOTE I AM NOT RESPONSIBLE FOR USER ERROR, YOU WILL NEED TO FIND THE SETTINGS THAT WORK BEST FOR YOUR HEATPRESS. RECOMMENDED IS 300 degrees for 20 seconds

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

PRE PRESS GARMENT FOR 10 SECONDS

Press at 300 Degrees for 3 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

Press again for 3-5 seconds

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

Print Around 8 - 8.5 Inches

PRE PRESS GARMENT for 10 seconds

300 Degrees for 5 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

Get ready for spooky season in style with our white trucker hat, featuring a playful "Spooky" text and bat design on the side! Perfect for Halloween lovers and those who enjoy a bit of fun year-round, this hat combines comfort and festive flair.

Key Features:

Stylish Design: The word "Spooky" is stylishly embroidered on the side with a flock of bats flying around it, adding a fun and festive touch to your look.
Classic Trucker Hat: Made with a mesh back for breathability and a solid front panel, this hat offers both style and comfort.
Adjustable Fit: Features an adjustable snapback closure, ensuring a comfortable and secure fit for most head sizes.
Durable Material: Crafted from high-quality materials that are built to last, making it perfect for daily wear or special occasions.
Versatile Wear: Ideal for Halloween parties, pumpkin patch visits, haunted house trips, or simply adding a touch of spooky fun to your everyday attire.
Why You'll Love It:

Our white trucker hat with "Spooky" and bats design is the perfect accessory to celebrate the spooky season or showcase your love for all things Halloween. Its unique design and comfortable fit make it a must-have for your hat collection.

How to Order:

Add to Cart: Click "Add to Cart" and proceed to checkout.
Enjoy Your Hat: Get ready to embrace the spooky vibes as soon as your hat arrives!
Care Instructions:

Spot clean with a damp cloth.
Avoid using bleach or harsh chemicals.
Allow to air dry.

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

Print Around 8 - 8.5 Inches

PRE PRESS GARMENT for 10 seconds

300 Degrees for 5 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

Print Around 8 - 8.5 Inches

PRE PRESS GARMENT for 10 seconds

300 Degrees for 5 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

PRE PRESS GARMENT FOR 10 SECONDS

Press at 300 Degrees for 3 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

Press again for 3-5 seconds

**THIS IS A DTF PRINT TRANSFER NOT A COMPLETED TSHIRT**

PRE PRESS GARMENT FOR 10 SECONDS

Press at 300 Degrees for 3 Seconds

HIGH PRESSURE 60psi/8-9 pressure

Peel Immediately

Press again for 3-5 seconds